Cannabis News

How to Use a Nectar Collector


The old ways of consuming cannabis still exist, such as smoking pot. As technology develops, it’s high time for ganja enthusiasts to try new techniques. New ways of consuming, like dabbing, are becoming more popular than ever.
This could probably be because collecting nectar isn’t as intimidating as some people would describe it. You may have some ideas of what a nectar collector is, but it would be helpful for beginners to describe them. And no, we’re not talking honey nectar here. MDR. This guide is all about collecting cannabis nectar.

What is a nectar collector?

A nectar collector is a small, vertical, portable dabbing device designed expressly for vaping cannabis concentrates such as wax, budder, or shatter. There is no combustion when using a nectar collector, as there is with smoking weed. The key word here is vaping.
Nevertheless, it should be mentioned that a nectar collector is not a traditional vaporizer. It is a device designed to vaporize cannabis concentrates. The term vaporizer in the cannabis context refers to an e-cig or vape pen.
Most nectar collector manufacturers use glass or silicon to make these collectors. Glass collectors have less effect on taste than silicone ones. However, silicone is safer to carry around with you. Which one you choose depends on your personal taste.

Components of a nectar collector

A nectar collector has three main parts. They understand :

Neck
The neck of a nectar collector somewhat resembles that of a bong or dab rig. This is where you will inhale the steam.
Body
About the body, think of it as a dab rig or a bong body. You can add water or not depending on the brand of nectar collector (some are dry while some are wet). If this is a wet nectar collector, you will want to add water before you start using the collector to remove the harshness from the steam.
Point
As for the tip, it can be titanium or quartz. The tip is built in to introduce heat into the nectar collector, which then vaporizes the concentrates.

Use a nectar collector

With the above details in mind, using a nectar collector is as easy as 1, 2, 3. Let’s take a look at the steps below.

1. Select your favorite concentrates
Concentrates can be oil, budder, rosin, crumble, shatter or wax. You can use your favorite concentrate in the nectar collector.

Nectar

2. Place chosen concentrates in a quartz dish
It is essential to put enough concentrates for a punctual dab. You will need to put cannabis concentrates in a quartz dish in order to use your collector.
3. Fill the body with water
It depends on whether your nectar collector is wet or dry. You can skip this step if it is dry. In the case of a wet nectar collector, filling the body with water aids in cooling the temperature of the vapor, filtration and reducing the harshness of the vapor.
In the case of a dry nectar collector, it would be advisable to use low temperatures to achieve benefits such as lower vapor temperatures and reduced vapor harshness.

Water pipe

4. Connect the body to the tip and neck

After assembling the nectar collector, you will then need to clip them together to ensure firmness and security. You see, temperatures can go up to 370°C. You want to make sure everything is secure. If you use butane to heat the tip and the tip falls out of the device, it can cause serious burns.
Clips are manufactured with the ability to withstand extremely high temperatures. Be sure to research the clips you use to ensure safety.
5. Heat the tip
Heat the tip of your nectar collector to the desired temperature using an e-nail coil or a butane torch. You need to heat the element by moving the flame or heating coil all the way around the tip.
The main reason concentrating the flame in one place is not recommended is that concentrates are easy to burn. You may even end up destroying the nectar collector.

Fire

To test if the nectar collector is ready to heat concentrates; place it about a fist away. If you feel a little heat, the collector is ready for use.
If you are a keen observer, you can also pay attention to the color of the tip. If it’s reddish, it means you’re ready to move on to the next step.

6. Place the nectar collector against the concentrates in a quartz dish and inhale the vapor
After heating up the mouthpiece and making sure the manifold is ready to use the concentrates, now is the perfect time to inhale your vapour.
The heated tip will vaporize the concentrates, allowing the vapor to pass through the collector body. If you are using a wet nectar collector, the water in the body will cool the vapor down a bit, before reaching the mouth through the neck.
If for some reason you don’t feel steam coming through, it means the tip has not reached the desired heat. It is essential to set the nectar collector down and allow it to cool before trying again.
After cooling, wipe the tip. Heat up the device one more time, making sure the collector comes up to temperature to require a fantastic dabbing experience.

nectar stones

Benefits of using a nectar collector

  • A nectar collector is equipped with most of the tools it needs. You shouldn’t have to buy any of its parts unless you’re replacing something.
  • It is small in size and convenient to carry when shopping outside or visiting a friend.
  • Easy to use, regardless of your cannabis consumption experience. You shouldn’t need to learn anything more about using a collector than what’s in this guide.
  • A nectar collector can be easily assembled and disassembled. That said, it is easy to clean each of its parts.
  • It’s fun to use a nectar collector. You will explore a new and interesting way to take your favorite cannabis concentrate!

Warning: This content is intended for educational purposes only. It has been compiled with research from external sources. it is not intended to replace medical or legal advice. Please consult your local laws for the legality of cannabis consumption.



#Nectar #Collector

Leave a Reply