Cannabis News

How to Decarb Weed in a Microwave [Microwave Decarboxylation]


defueling microwave

Do you like homemade edibles? Do you want to increase the potency of your cannabis edibles without using cannabis ingredients such as cannabutter? Next, you need to know how to decarb weed in the microwave.

If you use the pure form of cannabis, it does not have strong psychoactive effects. The easiest way to increase the psychoactive effects of your raw cannabis is to decarboxylate it.

Decarboxylation of cannabis helps activate cannabinoids. This produces more powerful psychoactive effects. Let’s learn more about what decarboxylated weed is and how to perform the process in the microwave.

What is decarboxylation?

Decarboxylation is the process of using heat to activate the raw cannabis plant. Additionally, decarboxylating cannabis in the microwave helps activate inactive compounds called cannabinoids.

The molecular structure of cannabinoids consists of an additional carboxyl ring. When you heat raw cannabis plants, the chemical makeup of the cannabis acids changes resulting in activated cannabis compounds.

These activated cannabinoid compounds interact with our body’s endocannabinoid system, enhancing the effects of THC and CBD.

Since cannabis contains hundreds of cannabinoids, you need to decarboxylate cannabis to initiate a chemical reaction that stimulates these cannabinoids to better interact with your nervous system.

Why should you use a microwave to decarbonize raw cannabis?

Heating cannabis buds decarbs terpenes and cannabinoids, increasing their effects. However, if you don’t use the best methods to decarboxylate marijuana, it will result in intense heat that can destroy some unstable molecules present in the cannabis plant.

Thus, you must use safe and reliable methods for decarboxylation of cannabis to properly stimulate THC, terpenes and other cannabinoids for a higher dose.

When you burn cannabis buds, the inactive ones THCA and CBDA transform into active counterparts.

But you can’t burn weed if you’re going to use cannabis in edible or in the kitchen. So how do you unleash the psychoactive properties of weed when growing your own cannabis?

You need to remove the extra COOH carboxyl group present in cannabinoids by decarboxylation. This proper process for decarbing cannabis requires time and heat. Many cannabis enthusiasts consume cannabis drying and curing for partial decarboxylation for microwave weed decarburization process.

Prepare your dry cannabis buds

High intensity of light and heat is detrimental to the plant as it damages the potency of your herb. Therefore, you should keep the cannabis plant dark and cool.

Once your cannabis plants are ready for harvest, you need to cut the branches and hang the plants upside down in a drying room.

The room should not have direct light. Avoid keeping your plants out in the cool air and make sure your drying room has a humidity of around 45-55%.

The ideal drying process takes about two weeks or until the cannabis branches are brittle. After that you can use a spray or a smoker to further decarboxylate marijuana.

This will help you avoid the hardening process. However, vaping and curing affect the terpenes present in the cannabis plant. Therefore, most cannabis users proceed with the curing process.

Healing the cannabis plant

If you are looking to increase the potency of your cannabis for making edibles, you need to preserve the flavor and aroma of your cannabis buds. Curing the buds will help retain aroma and taste.

Cannabis experts cure cannabis buds by storing them in mason jars. You can fill 3/4 of a jar, which allows it to have some air.

Once the glass jar is full, place it in a cool, dry place.

Check your cannabis buds by opening the glass jar to let some fresh air into the mason jar. Then please keep them in the mason jar for two weeks for best results.

How to Decarbonate Weed in the Microwave

How to Decarbonate Weed in the Microwave

If you don’t want to decarboxylate marijuana in the oven, microwaving it is a great choice. However, microwaving your cannabis flowers is a more difficult process because you cannot regulate the heat.

In addition, microwaves vary in their characteristics. This makes it difficult to manage the specifics you need for proper decarboxylation in the microwave oven.

Choose a low microwave setting if you’re worried about burning cannabis in the microwave.

Instead, let the cannabis cook a little longer. Check your cannabis occasionally to make sure it isn’t burning.

Here’s how to perform the decarboxylation process in the microwave.

Grind your cannabis flowers

The first step to decarbing your weed in the microwave is to lightly crush the cannabis buds.

For example, you can place the cannabis buds on parchment paper and grind them until they have a moderate consistency. Next, put the ground cannabis in a microwave-safe bowl.

microwave the buds

It would be best if you only put the cannabis buds in the microwave after setting the power to minimum. If you overheat weed at high potency, it can ruin the potency and texture of your cannabis buds.

Higher temperatures overheat marijuana, burning terpenes and cannabinoids. Therefore, you need to stick to a low temperature and slow time to have potent marijuana.

We suggest putting the weed in a microwave safe tray and storing it inside the microwave once you have set the settings to minimum power.

You can either heat the weed in the microwave in short bursts of around 10-20 seconds on full power, or let it sit in the microwave for 90 seconds on minimum power.

After each burst, you must open the microwave door to let out the steam. Then, toss your buds before putting them back in the microwave.

Check the texture

Occasionally, take out the microwaveable bowl and sniff the plant material. It should smell pungent.

Mix in the ground buds and microwave in short bursts for 60 seconds until the weed is decarburized. The decarburized grass changes color from green to medium brown.

microwave weed

Things to remember

You can use different microwave settings to decarb your weed, but be sure to choose a slow and reliable setting.

If you use a higher temperature to heat up the marijuana, it burns the cannabinoids and affects the terpenes, which reduces potency. It also ruins the overall effectiveness of the product. Therefore, we suggest choosing lower temperature and longer time settings for effective decarboxylation.

Additionally, you can keep damp paper towels in a bowl of water and place them in the microwave. It helps eliminate the pungent smell and keeps your home from smelling like a brotherhood.

If you microwave your weed more than necessary, it will dry out your cannabis for smoking but will reduce the THC and terpene content.

So you won’t be able to get the high you get from high weed if the heat destroys the terpenes and THC. Therefore, you should also look into other decarboxylation methods.

Some other weed decarboxylation techniques use common household materials such as an oven, glass jars, sous vide method, slow cooker, or double boiler.

Closure with Decarb Weed Microwave

Decarboxylation is the magical process that enhances aroma and flavor, allowing you to make delicious treats. Once you have decarboxylated marijuana there are many ways to use it.

Since decarboxylation of cannabis preserves aroma and flavor, making herbal edibles is the most appropriate use. You can also use decarbed cannabis to make infused oils and tinctures.

You can use it to make cannabutter and cannabis oil. There are no hard and fast rules for making cannabis edibles or canna oil, so you can experiment with various recipes and cook up something you like best.



#Decarb #Weed #Microwave #Microwave #Decarboxylation

Related Posts

Leave a Reply