gas mask bongs, also known as a gas mask steamroller or oxygen mask bong, are popular around festivals and among serious cannabis fans (not to be confused with a glass face mask bong).
Known for their unique tubes, they have a reputation for delivering fast and powerful effects. Yet are they all meant to be?
For the ultimate scoop on them, here’s a quick guide on how to use them, the risks involved, and even how to make your own. homemade gas mask water bong at home.
How to use a gas mask bong
Marijuana gas masks are surprisingly simple to use. In fact, they are just like a regular bong.
But, does a gas mask get you high? In fact, they don’t. The only difference is that it’s much harder to exhale. Plus, you can safely soar just as high with a regular water bong.
Still, they look cool and are fun experiments.
To get the most out of your gas mask water bong, here’s how to use it:
Put on the gas mask bong. It should be secure but still easy to remove in case you start coughing.
Rev up and fire up your bowl by placing your finger on the carburetor.
Remove your finger from the carburetor and inhale to release the part. If your bong does not contain carbs, remove the bowl.
Close your eyes (to minimize eye irritation from the smoke) and exhale. The stale smoke will remain for some time, although it will slowly begin to flow from the carburetor.
To speed up the elimination process so that stale smoke does not linger, remove the bowl or remove the gas mask completely (or see our guide on how to clean a bongit’s the same process.) If you start coughing, feel dizzy, or have trouble breathing, remove the weed gas mask immediately.
How to easily make a weed gas mask
Are you reading this article and you crave a gas mask spray? Do you want to learn how to make your own gas mask bong and how to bang a gas mask bong? Well you are very lucky because we are going to explain to you how to make a gas mask.
Making a homemade bong mask is surprisingly easy. With a trip or two to the hardware store or some online shopping, it’s simple to find everything you need to make your own. DIY gas mask water bong at home.
- Gas mask
- rubber sealant
- Electrical tape
- Heat resistant plastic tubing cut to size (some people prefer soft plastics)
- Bowl with rubber stopper
- Small tube for downstem
Using the drill, drill a small hole three-quarters through the plastic tube. The hole should be large enough for the bowl and down rod to fit snugly into the pipe. Once cut, place the bowl and downpipe into the pipe.
Seal the bottom of the pipe with a tub stopper or secure the rubber sealant to the bottom with electrical tape. You must use enough plug material to prevent water from leaking out of your gas mask for smoking weed. To fill your smoking gas mask bong, remove the bowl and add water.
Use a drill to carve a large carb to increase the airflow and security of the smoke mask. A carb will prevent choking and give you a chance to exhale the smoke if you start coughing with the gas mask attached.
For added safety, leave the bowl out of the pipe as you exhale.
Prepare the cannabis gas mask by removing all external filters. Seal excess holes with electrical tape and rubber sealant. Remove any seals or barriers from what will become the mouthpiece of your new gas mask water bong.
The goal is to have only one vent that will eventually attach to the pipe of the water bong. Air will need to flow in and out of this vent easily, so some adjustment of the gas mask may be required.
Attach your newly homemade gas mask water bong to the actual gas mask.
While you traditionally inhale through a side filter in a gas mask, you will inhale from the bottom opening in weed gas masks.
When you are ready to exhale, simply remove the plastic tube from the gas mask. When buying a tube, make sure the tube can easily fit into the gas mask.
Seal with electrical tape to keep the bong attached.
Be careful! Make sure you can easily remove it in case you start coughing and need some fresh air. Although a carburetor helps provide additional airflow, it is essential to ensure that the mask is easily removable.
How to Choose the Best Gas Mask Bong
All are not equal. When trying to find the best, investing in a quality product makes all the difference.
Here are some tips and tricks to try and find the best one:
Choose one with a snorkel
The best ones have snorkels or vents. This allows you to breathe real air while you use the gas mask bong.
This is a huge safety bonus, as it can prevent you from passing out from inhaling carbon dioxide and carbon monoxide for too long in the event of an accident.
Choose one with a splash guard
the the best will also have some sort of splash guard or filter where the bong meets the mask.
This bong is attached to your face, which means you risk getting water sprayed on yourself if you move too aggressively or are clumsy.
In addition, the water can also come out of the bowl with a gas mask bong. This means that you can spill water irritatingly all over the place when you have it attached to your face.
The best will have splash protection.
The best glass mask bongs will feature heat resistant materials
If you plan to use it frequently, researching beforehand is a good idea. Many of them are made with cheap materials and flimsy plastics.
If you are concerned about this, it may be worth emailing the distributor and manufacturer to find out whether or not their products are made with heat-resistant plastics.
There are a few other things that people often appreciate about them. A comfortable, close-fitting fit is often preferred.
A strong head strap to prevent slippage is also a popular feature.
Trying out one of these contraptions in a smokehouse to see how it performs before buying is probably a good idea.
Risks of using a gas mask bong
Of all the ways to consume cannabis, are among the least safe. Why? Some are made from simple plastic soda bottles.
By their nature, they increase your exposure to carbon dioxide and carbon monoxide over the long term.
They can also easily overwhelm the consumer with coughing fits that are aggravated by a lack of accessible oxygen if you cannot detach the bong or remove the mask.
There’s a reason people tell you not to put plastic bags over your head.
They are sold in the store and often feature vents or snorkels that prevent you from suffocating. Yet when making one at home, many people rely on plastic jugs and other non-breathable materials.
This creates some problems. One of these issues includes the fact that you may be exposed to large amounts of smoke for long periods of time when your body really needs oxygen.
No one has ever died from it.
Yet they increase the risk of choking and fainting if for some reason you keep the mask on too long and continue to inhale smoke.
Be sure to buy a gas mask bong with a snorkel or make sure it can be easily removed or the bong can be removed.
Cannabis is not a dangerous substance. No need to make it dangerous by choking.
Homemade and store-bought products can irritate the eyes, mouth, and lung tissue.
They increase your exposure to hot, irritating smoke because you breathe it in longer.
Also, since many of them cover the eyes, you may find your eyes and skin more irritated than normal.
Breathe in cancerous material
The plastic used in many of them was not designed to withstand heat. By using water jugs and soda bottles to make one, you increase your exposure to carcinogenic compounds and compounds that disrupt the endocrine system, such as bisphenol A (BPA).
Excessive exposure to carbon dioxide and carbon monoxide
While many cannabis users often suggest that you need to hold your hits for long periods of time, this is actually a myth.
A simple long inhale and a slow exhale will work just fine. In fact, your full inhale doesn’t need to take more than three seconds.
A gas mask bong may sound cool, but you can also climb that high with a regular bong without breathing stale air. In reality, they are more about looks and style than efficiency and safety.
#Gas #Mask #Bong #High