Cannabis News

Ayurveda Medical Practices and Cannabis


If you tried to grow weed plants, you know how devastating moldy cannabis plants can be. For many people, this is the worst experience that will cost them hundreds or even thousands of dollars. However, you can learn how to deal with mold on cannabis plants, which will give you some peace of mind. To solve the problem, you need to know what mold looks like on cannabis plants. After learning what mold looks like on cannabis plants, you can deal with it.

First, we will identify the different types of mold. Followed by a comprehensive list of what to do if this happens to your beloved plant. And also how to prevent it.

Different Types Of Marijuana Mold

Growing cannabis comes with many hurdles, and none of them are more common or irritating than mold. Mold is both harmful and annoying, in addition to being a little difficult to deal with. Here is a little advice to identify and prevent this from happening to you:

There are some different types of molds that could potentially invade your cannabis garden. However, there are two streams: powdery mildew and botrytisthe latter being essentially bud rot.

Botrytis is quite difficult to identify because it is only visible at the base of the stem. However, some small leaves will eventually wilt and dry out, which is a sure sign that your buds are in pain.

If you see some of your plant’s leaves drying out, look a little closer and you might find some slightly hairy details. Fluff can potentially start growing on your beloved plant’s leaves which are blue or white, which is harmless enough if treated immediately. However, if you allow botrytis to progress, you may notice tiny blackheads appearing in the mold. They’re spores, and they spread like crazy, so don’t breathe them in!

Powdery mildew is another extremely common type of plant mold and can be observed to look exactly like the name suggests. Powdery mildew is a white, dusty substance that sits on the surface of plant leaves and inhibits photosynthesis, which is how your plant makes its food, using light. Eventually, if your plants suffer from this disease, their leaves shrivel and die, therefore it is best to prevent powdery mildew from occurring in the first place. But how do you do that?

Mold on cannabis buds

How to deal with mold on weed plants

As mentioned at the beginning, the worst aspect of growing the cannabis plant is an infestation of mold which, when it takes hold of the plant, does not seem to go away easily. But here are simple and ingenious ways to fight mold:

1. Remove buds from faded plants

Anytime you see a wilted cannabis bud, it’s a sign that mold has invaded the plant. Instead of wasting time, gently remove the bud. If you get rid of it, chances are you’ll save the rest of the plant.

2. Cut off affected leaves

Just as you would with the affected bud, if you suspect part of the cannabis leaf has been affected, it is best to cut it off. We recommend remove all affected leaves and buds of infected plant, instead of waiting for the mold to spread to all the other cannabis plants.

3. Make sure there is good air circulation

One of the biggest contributors and facilitators of mold on marijuana plants is the lack of proper airflow to the plant. To ensure that mold does not invade your plants, ensure that there is adequate air circulation in the crops.

4. Inspect the humidity

The amount of heat and air in your yard is also crucial in taming mold on cannabis plants. Although it can be difficult for those growing cannabis outdoors, it is still essential to check the humidity levels.

humidity

5. Ensure a constant climate on the plants

The issue of ensuring a consistent climate on marijuana plants is complicated, especially if you are growing your plants in an open field. For those growing cannabis in an enclosed space, it’s more comfortable. You can use dehumidifiers and fans to regulate the indoor climate around your crops.

6. Control the temperature

Like any other crop, the cannabis plant and the temperature of the environment are key to preventing mold on cannabis plants. To keep the temperature constant around your crops, use available temperature control devices that will keep it within normal ranges while providing high airflow but keeping humidity at bay.

Temperature

7. Water and feed your plants well

You may think that watering and feeding your crops have nothing to do with preventing or fighting mold on cannabis plants, but they certainly do. A healthy cannabis plant can more easily resist mold invasion than an unhealthy plant, badly watered and badly nourished.

8. Space Your Cannabis Plants

So to speak, mold can invade your plants when they are crowded. Again, it comes down to a lack of sufficient airflow. You need to make sure there is enough space between your plants to avoid congestion where mold grows.

9. Prune your cannabis plants

Again, the goal of prune your cannabis plants is to make sure your plants have sufficient airflow, which will drive out mold over time of your cannabis plants.

How to get rid of mold on buds

For starters, never smoke moldy buds. It is extremely dangerous! If mold appears on your buds, it can ruin months of total dedication and hard work. Unfortunately, it is quite difficult to prevent mold spores from entering the buds. That’s because these literary spores are found everywhere, even in the air we breathe!

But that doesn’t mean mold spores can survive in all conditions. Therefore, you can manipulate the conditions of your ripening area to solve this problem and avoid mold on the buds.

1. Dry the buds properly

Once you have harvested your mature buds, you have to dry them well. Properly dried buds should be firm to the touch. They should not crumble or feel damp or soft to the touch. This means they haven’t dried well and can potentially develop mold. There is only one solution to this problem, and that is to completely dry out the buds!

pot

2. Rotate the jars during the hardening phase

Drying involves putting your dry buds in an airtight jar and storing them in a dark place. Moisture can be released from the buds and stems and seep into the air and other buds eventually. This humidity exposes the buds to the risk of mold formation during drying. The only way to tackle this problem is to remove excess moisture.

As a general rule, you should burp the heads of curing 2-4 times per day early in the curing process and less frequently as the humidity drops. To avoid mold, you need to pay close attention to detail on a daily basis. If there are signs of mold on your buds, you should immediately remove the moldy buds and throw them away!

3. Use a hygrometer and a dehumidifier

When curing your buds, you need to ensure a humidity level between 55% and 62%. You’ll use the hygrometer to measure the relative humidity in your ripening jars, and if it exceeds these limits, you’ll use the dehumidifier to lower it.

What to do in case of botrytis

The best measures to prevent both types of mold – as mentioned at the beginning of the article – are to regularly check your plants and make sure they are getting everything they need to grow properly. However, preventative measures will not help people struggling with a mold problem right now. So what to do?

In the case of botrytis, the The only option you have is to use chemical sprays to combat the effects of mold. You can buy sprays to rid your crop of bud rot at just about any garden store. Another thing you can try is moving your infected plants to a warmer area with low humidity. This will prevent the disease from spreading.

Powdery mildew on cannabis plants

What to do with powdery mildew?

With powdery mildew, there are proven natural remedies. To combat this type of mold, add two teaspoons of apple cider vinegar to a liter of water and spray it on your plants. That should do the trick. Another method is to mix 60% milk and 40% water and spray them, and that should work like magic as well.

Conclusion

All in all, mold is a nasty plant-killing culprit that needs to be stopped, but luckily there are plenty of ways to get rid of it before it does too much damage to your plants. Preventative measures are the best course of action to take, but it is good to know that more can be done if conditions worsen.

Good luck!

Warning: This content is intended for educational purposes only. It has been compiled with research from external sources. it is not intended to replace medical or legal advice. Please consult your local laws for the legality of cannabis consumption.



#Ayurveda #Medical #Practices #Cannabis

Related Posts

Leave a Reply