Cannabis News

4 mistakes you need to avoid when using LED grow lights for your weed

California is a state of cannabis lovers who have at least one cannabis plant at home. Are you part of this crowd? Well, then you need to know how meticulous you need to be to have a healthy harvest of dense buds. From checking micro and macronutrient levels to maintaining a watering schedule, many factors come into play. One such factor is LED grow lights.

Most hobby cannabis growers believe that more light means more cannabis. Well, that’s true, but only if it’s done right. So, let’s go over some of the most common mistakes with LED grow lights that can prevent you from having a healthy harvest.

How important is light for cannabis?

How important is light for cannabis?

To grow cannabis, all you need is quality seeds, good soil, a place to grow, and you’re good to go. However, there is one very essential factor for growing marijuana that we usually overlook- light.

All plants need light to grow healthily. And apparently, marijuana needs it a lot more than any other plant. Light plays a very important role to determine the quality of your buds. And therefore, you can’t be ignorant when it comes to growing lights for your cannabis.

Until now, many cannabis growers used HID lights for this purpose. However, the trend is changing now. Many weed growers are now turning to LEDs, which over HIDs have very significant advantages. For example, they consume less electricity and produce less heat, which is a very big advantage, especially for small producers.

Now medical patients usually have a limit of 6 plants as per law. Some may even have their limit increased with a legitimate referral. Several online clinics such as Long Beach MMJ MDS can put you in touch with a doctor for a medical evaluation. Even with a high limit, the scale is not as large as that of professional growers. So while switching to LED lights may seem insignificant, it can be beneficial in terms of saving money and getting more buds from a few plants.

So, let’s take a look at common mistakes you should avoid when using LED grow lights for cannabis.

Not keeping a good distance

Not keeping a good distance

This is probably the most common thing we see that novice growers do when using LEDs. Since HIDs produce a lot of heat, as a precaution growers also place their LEDs at a far distance sometimes. Alternatively, due to the notion of less heat production, some may also place their LEDs too close to the plant.

If you hold the light too far away, your plant may stretch too far to get close to the LED. On the other hand, if you place the LED too close, the heat may burn the bud.

So how far apart should you place your LED? Unfortunately, there is no “ideal distance” here. The distance actually depends on the type of LED you are using. Consult your manufacturer’s manual or website for this. But if you can’t find anything anywhere, try your luck keeping your light 35-45cm from the canopy.

over water

Since an HID produces a lot of heat compared to LEDs, the floor dries out much faster when using the former. But growers sometimes forget this when switching to LEDs. In the case of LEDs, the heat is considerably reduced. And so your plants don’t need as much water as before. You should therefore modify your watering schedule accordingly.

Overwatering can cause serious damage to your plants by opening the way for pests and other diseases. It is therefore very important to keep an eye on it. And if in doubt, let the soil dry out before watering again.

Choosing the wrong LED lighting

If you’re new to LED grow lights, you’ve probably heard of “full spectrum” lights. This is nothing but a buzzword describing that they can be used for both vegetation and flowering. Some models also have an option to change the light spectrum depending on the phase. There are also other LEDs designed only for the vegetative phase, which emit a bluish light, promoting vigorous and rapid growth. Although there are a few, with a reddish light, only for the dawning time.

So before deciding which LED lamp you want to buy, make sure you know exactly what you want from it.

Choosing a poor quality LED

Choosing a poor quality LED

The one and only likely downside of LEDs over HIDs is their high price. Not everyone can afford a good quality full spectrum LED light. But they still want to reap the benefits of technology. And therefore, they look for other cheaper options. Now, the problem here is that there are many poor quality options available online from various foreign manufacturers. However, these lights can barely help you grow a plant, if at all. Moreover, these poor quality lamps are not very safe to use because they are often manufactured in a country with very lax electrical safety standards.

Therefore, it is better to spend a little more on a good quality LED than on these cheaper options. Your plant will be much happier. In addition, the running cost of an LED is much lower than that of an HID. So you can save a lot here.

See? Growing cannabis is not that difficult. You just need to avoid a few mistakes, and in a few weeks you’ll have your own healthy weed to blow and go. However, there is another tip that might help you here: get a producer license. With a cannabis grower’s license, you can legally grow a lot more than anyone else. And it gives you great access to high quality self-grown weed. Now, if you’re thinking of getting one for yourself, just apply for 420 reviews online, and you’ll get it in minutes. For any other questions regarding the cultivation of cannabis, refer to this article.

If you think marijuana can help you in any way, you should be able to access it. And what better access can you have than having it in your own backyard?

#mistakes #avoid #LED #grow #lights #weed

Related Posts

Leave a Reply